Protective Sprays

Product Details:

3M™ Zinc Spray 16-501 is a dispersion of fine powdered 97% pure zinc in petroleum distillates. This spray is formulated to inhibit rust and corrosion of metal surfaces. It is suitable for use in transmission and distribution equipment including towers, transformers, light standards and other metal and galvanized surfaces.

3M™ Zinc Spray 16-501 is halogen-free and leaves a barrier coating similar to hot-dipped galvanized surfaces. With its instant drying capability, this non-corrosive spray preserves base metal, even when scratched or chafed. RoHS 2011/65/EU Compliant.

• Helps prohibit rust and corrosion of metal surfaces
• Suitable for coating applications
• Allows for easy application by aerosol spray
• 16-oz can
• RoHS 2011/65/EU Compliant
• 12/case

Product Details:

3M Scotch 1600 Anti-Corrosion Spray. Scotch 1600provides highly effective anti-corrosion protection. Its rubber-asphalt base forms a dense, abrasion resistant covering that protects against moisture, spray salt water, all corrosivemedia and is resistant to the effects of physical impacts.

Additional Information:

• Item Code: 1600

Product Details:

3M Scotch 1605 Dehumidifying Spray. Scotch 1605dehumidifying spray penetrates and displaces moisture. It also defrosts frozen sections. 3M 1605 then forms a thin protective film and thus prevents the renewed ingress of moisture.

Additional Information:

• Item Code: 1605

Product Details:

3M Scotch 1633 Rust Remover Spray. Scotch 1633 is a multi-purpose spray. It loosens rust, protects against moisture and renewed oxidation, can be used ideally as a lubricant, easily releases tightly sealed bolts, and has a high penetration capacity.

Additional Information:

• Item Code: 1633

Product Details:

3M Scotch 1617 Zinc Spray. ... 3M 1617 spray has excellent adhesion to iron and steel, is resistant to weathering, UV radiation, moisture, heat up to +500^oC, alkaline solutions and mineral oils. It is an ideal primer for metal constructions, and complies with DIN 50976 (zinc content) and DIN 53167 (corrosion protection).

Additional Information:

• Item Code: 1617

Product Details:

It is general purpose spray. Provides excellent capillarity activities, lubricating, corrosion and cleaning properties, adhesion to metal and a extreme low surface tension.

Able to release screws and remove dirt like adhesives. Displaces water immediately which avoids traacking currents. The high dielectric strength allows using sensitive seitch connections.

Additional Information:

• Item Code: 1640

Product Details:

• This 3M Scotch 1639 Polyurethane Foam Spray (400ml) is made by the prestigious 3M brand. It’s a Polyurethane Foam Spray that’s ideal for sealing, filling, isolating and fitting.It expands upon contact with air, allowing for perfect sealing.This guarantees proper thermal and acoustic isolation. Contains 400ml.

Product Details:

3M Anti Rodent Repellent Spray

• Keeps away rodents/Mice
• Repellant Coating
• Automotive usages

Product Details:

Zincosil 400 zinc spray / electroplating spray, specially formulated for electroplating steel objects. Also suitable for retouching of welded or previously galvanized parts. Increased coverage power, a layer of approx. 30 mu is formed at a time. Excellent resistance to oxidation. Forms an elastic layer that adheres to any surface. Has a color equal to the surface and does not drip. Can be painted over. High abrasion resistance. Spray can 400 ml.

Additional Information:

• Item Code: 14510

Product Details:

Details

The Scotch® Spray Mount™ Repositionable Adhesive is ideal to stick and mount artwork, layouts, posters, presentations, graphic designs and more. It firmly bonds acetate, foils, fabrics, light tissues and newsprint. This Scotch® Spray Adhesive is non-wrinkling and resists bleed-through, giving a neat finish to craft projects. It allows repositioning when sprayed lightly.

Scotch® repositionable spray adhesives are reliable quick fix solutions as they are compact, handy and can be used to bond a variety of objects.
The Scotch® Spray Mount™ Repositionable Adhesive is a fast and convenient solution for a variety of art, craft and other bonding needs. This specially-formulated spray adhesive provides a fast and secure bond for home, office and craft projects. This Scotch® spray mount adhesive can be used for layouts, art work, posters, presentations, graphic designs and more. It bonds most acetate, foils, fabrics, light tissues and newsprint. This repositionable adhesive can be easily applied to cover large areas.
You can use the controlled spray design of this adhesive can as per your requirement; a light spray to allow repositioning, or a heavy spray for a stronger bond. This non-wrinkling, quick tack spray mount can resists bleed-through to give your craft projects a neat finish.

 

• Suitable for layouts, posters, presentations, graphic designs and more
• Bonds most acetate, foils, fabrics, light tissues and newsprint
• Non-wrinkling adhesive ensures quick tacking, dries clear and prevents bleed-through
• Easy to apply on large areas
• Does not contribute to ozone depletion

Product Details:

Scotch 1601 is a clear insulating & covering paint based on alkyd resin. It hardens in to flexible & resistant film, with excellent adhesion to most common surface such as metal,glass,plastic,wood, etc. scotch 1601 is resistant to UV -rays,acid,oil & especially characterized by its high dielectric strength.

Additional Information:

• Item Code: 1601

Product Details:

3M Scotch 1602 Red Protective Insulation Spray. Scotch1602 ia a red insulating and covering spray based on alkyd resin. ... Scotch 1602 is resistant to UV-rays, acids, oil and alkalis, it is moisture and weatherproof and is especially characterised by its high dielectric strength.

Additional Information:

• Item Code: 1602

Product Details:

Scotch Brand Insulating Sprays are electrical grade, fast drying sealers and insulators in a pressurized can. These sealers protect surfaces against weather, moisture, corrosion, oil, alkalies and acids. The sprays can afford easy access to hard-to-reach spots.

Additional Information:

• Item Code: 1603

Product Details:

Scotch 1604 is a clear insulating and covering grey spray based on alkyd resin. It cures into a flexible and resistant film, with excellent adhesion to most common surfaces such as metal, glass, plastic, wood, etc. Scotch 1604 is resistant to UV-rays, acids, oil and alkalis. It is moisture and weatherproof .

Additional Information:

• Item Code: 1604

Product Details:

This Scotch 1626 Spray is made by the well-known 3M brand. It's an ideal dissolving cleaner for greases, oils, lubricants, resins and tar. It's residue-free, non-corroding and washes away asbestos.

Additional Information:

• Item Code: 1626

Product Details:

3M Scotch 1625 Contact Cleaner Spray. ... The 3M 1625 spray loosens dirt, light oxide layers and impurities of every kind in an effective and gentle manner. 3M Scotch 1625 is electrically neutral and totally residue-free, making it ideal for use in almost any environment as a spray cleaner.

Additional Information:

• Item Code: 1625

Product Details:

It lubricates moving parts, without becoming resinous and can be used over a wide temperature range (- 32°C to + 177°C) thereby, providing long lasting protection against moisture and corrosion. This 3M Scotch 1609 Silicone Lubricant Spray is neutral towards paints, plastic, rubber, foamed materials, wood and fabrics.

Additional Information:

• Item Code: 1609

Product Details:

Specifications
3M CL 600- Brand -3MWeight-10 ozProduct tipe-AerosolSize-10 oz
Prices-250+ gst

Product Details:

3M Novec Contact Cleaner Plus is formulated with extra cleaning power to remove stubborn oils, greases and silicones, as well as fluorinated oils and greases, dust and particulates, from sensitive electrical and electronic equipment.

Product Details:

3M Novec Flux Remover is a fast drying, low odor spray that is used to remove solder, no-clean, rosin-based, and lead-free fluxes from electronics. 3M Novec Flux Remover is a fast drying, low odor spray that is used to remove solder, no-clean, rosin-based, and lead-free fluxes from electronics.

Product Details:

3M Novec Contact Cleaner/Lubricant is specified under the medium duty cleaning products.

Features:

 Quicky penetrates and flushes away oil and greases from sensitive electrical and electronic equipments
 Meets MIL-PRF 29608A (Class L) 
 Leaves a thin protective silicone coating

Product Details:

3M™ Novec™ Electronic Degreaser is ideal for cleaning heavy oils, greases and handling soils from electronic and electrical equipment. This heavy-duty cleaner is suitable for use on metals and many plastics, with the exception of acrylics, polycarbonates, ABS and PS.