Coating Solutions

Product Details:

Scotchkote Epoxy Ceramic Surfacer CR 511 is ideal for use in an industrial and construction based environment where metal surfaces have become worn out or rusted and works to provide a low friction surface in order to improve flow rates, e.g in pumps

Additional Information:

• Item Code: CR511

Product Details:

Scotchkote Epoxy Ceramic Surfacer CR 511 is ideal for use in an industrial and construction based environment where metal surfaces have become worn out or rusted and works to provide a low friction surface in order to improve flow rates, e.g in pumps.

Additional Information:

• Item Code: FG512

Product Details:

3M Scotchkote Epoxy Ceramic Repair EG 513 has been specifically developed as a ceramic filled repair system for rebuilding and repairing equipment requiring good mechanical strength, combined with abrasion and erosion resistance.

Additional Information:

• Item Code: EG513

Product Details:

3M Scotchkote Epoxy Coating 162 HB/162HBL

Protects internal and external surfaces against attack from aggressive chemicals and fuels.

3M™ Scotchkote™ Epoxy Coating 162HB provides excellent pipeline corrosion resistance for both internal and external surfaces. This 100% solids lining can be used to coat pipes, tanks, vessels and other equipment in contact with sea water, raw water and wastewater. Scotchkote™ Epoxy Coating 162HB may be used on concrete and cementious surfaces when used with Scotchkote™ Epoxy Sealer SP 810.

Product Details:

Details

• For use on most aggressive (hazardous) and non-aggressive liquids.
• Four Sorbents in one - use as a boom, pillow, pad, or roll.
• Perforations every 16" allow you to select the length desired.
• Each perforated sheet unfolds to approximately 18" x 16"
• 5 inches X 50 feet (10.5 gallons/50 foot section).

Chemical folded sorbents are one of the most versatile environmental safety products available. Chemical sorbent applications range from maintenance to spill management. Perforations can customize the length. Sorbent can be unfolded into pads or pillows.

Folded Sorbent is dispensed in the form of a 5 inch wide continuous roll, perforated every 16 inches. Tearing at the perforations can customize the length needed, can be unfolded into pads or pillows. Applications range from maintenance to spill response. Folded sorbent is 5 inches X 50 feet (10.5 gallons/50 foot section).

 

Product Details:

Details

• For use in oil-only Sorbent applications.
• Four Sorbents in one - use as a boom, pillow, pad, or roll.
• Perforations every 16" allow you to select the length desired.
• Each perforated sheet unfolds to approximately 18" x 16".

Four folded petroleum sorbents in one. It can be used as a boom, pillow, pad, or roll, which means fewer products need to be stocked to meet your sorbent needs.

The folded sorbent is perforated every 16 inches to allow you to select the length required, so there's less waste

Product Details:

Product Details

3M™ Fluorinert™ Liquid FC-770 is a non-conductive, thermally and chemically stable fluid with a wide liquid range (-125 to 95 deg C) for use in many low temperature heat transfer application such as reliability testing and cooling of electronics.

3M™ Fluorinert™ Liquid FC-770 is clear, colorless, non-conductive, non-flammable, residue free, thermally and chemically stable liquid ideal for use in many heat transfer fluid applications. Its very wide liquid range (-125 to 95 deg C) and compatibility make it well suited for a variety of electronic single and two phase heat transfer applications, including in the reliability testing, power conversion, electronic cooling and others. Because FC-770 has an extremely narrow boiling range, its composition will not deviate with time, insuring consistent transport properties.

 

• Thermal stability
• Chemical stability
• Wide liquid range
• Non-conductive
• Narrow boiling range
• Compatibility

Suggested Applications

• Well suited for a variety of electronic single and two phase heat transfer applications, including in the reliability testing, power conversion, electronic cooling and others

Product Details:

Product description 3M™ Fluorinert™ Electronic Liquid FC-770 is a thermally stable, fully-fluorinated liquid that has ideal properties for use as a heat transfer fluid in a variety of industries. The inertness of Fluorinert liquid FC-770 permits its use as a direct contact single- and two-phase coolant in certain supercomputers and sensitive military electronics. Its high dielectric strength and electrical resistivity are ideal for applications in high voltage transformers and power electronics. In the semiconductor manufacturing industry, its wide liquid range makes Fluorinert liquid FC-770 suited for cooling ion implanters, dry etchers and CVD machines. Its low pour point also permits its use in thermal shock and test equipment.

Product Details:

Details

• Easy application and processing - dries in seconds without the need for thermal post-curing
• May require little or no masking
• Easily removed for rework & repair
• Contains no volatile organic compounds (VOCs) and has low global warming potential
• Is thermally and electrically stable with excellent dielectric properties
• Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists

3M™ Novec™ 1700 Electronic Grade Coating is designed for the protection of printed circuit boards and electronic components. It is a clear, low viscosity solution of a 2 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent.

Additional Information 3M™ Novec™ 1700 Electronic Grade Coating is designed for moisture and corrosion protection of printed circuit boards and electronic components. It is a clear, low viscosity, low surface tension solution of a 2 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent. The coating dries to a thin, transparent, film with excellent hydrophobic and oleophobic properties. It repels oils, water, silicones and photoresist solutions. The coating is easy to apply (dip, spray or syringe dispensing), air-dries in seconds, requires little or no masking and is removable and repairable.

 

Product Details:

Product Description
Scotchkote Epoxy Coating 175UC has been specifically developed as a 100% solids lining for the internals of tanks, vessels and other equipment in contact with aggressive chemicals.

Product Features

• Combines good application characteristics with excellent corrosion protection and ultimate chemical resistance.
• Is designed for application in two or more coats by brush or roller.
• Is primarily intended for use on steel but can also be used on concrete surfaces with the appropriate primer

Product Details:

Details

• For use on most aggressive (hazardous) and non-aggressive liquids.
• Available in three lengths.
• Ideal for placing around equipment.
• Helps prevent leaks/spills from spreading to adjacent areas.
• Scrim on the outside of mini-boom identifies the use while containing particulate Sorbent material.

Chemical sorbent mini booms are typically used to encircle spills and to contain leaks. A 3 inch diameter scrim on the outside of the boom identifies the application.

Product Details:

3M™ Novec™ 1902 Electronic Grade Coating is a fluorinated polymer diluted in a blend of 3M™ Novec™ 7100 and 7200 Engineered Fluids, segregated hydrofluoroether solvents, providing a low viscosity, low surface tension coating solution.

Designed for moisture and corrosion protection of printed circuit boards and electronic components, it dries to an ultrathin, transparent coating with excellent hydrophobic and oleophobic properties. It does not need curing and is easy to apply. Novec 1902 coating is non-flammable, non ozone-depleting, low in toxicity, low in GWP, RoHS compliant, and VOC exempt (per U.S. EPA).

Product Details:

Data Sheet and Application GuideProduct DescriptionScotchkote External Wall Coating FP 812 has been specificallydeveloped as a weatherproofing, anti carbonation coating forexternal walls.Product Features• Combines good application characteristics withfast drying capabilities.• Can be applied to most surfaces without theneed for a primer.• Can be applied by brush, roller or airless spray.• Provides an abrasion resistant finish with ahigh degree of flexibility

Product Details:

Scotchkote GP 120 Epoxy Coating (Thortex Corro-Tech GP) is ideal for use on structural steel, including abrasive, blasted and pressure cleaned, found internally or externally in an industrial environment. This fantastic product offers good corrosion protection, to protect surfaces for a long period of time.

Product Details:

3M™ Scotchkote™ Epoxy Metal Repair EG 503 is a specifically developed high performance metal compound that provides good mechanical strength combined with easy machining properties.

Additional Information:

• Item Code: EG503

Product Details:

Product Description

Scotchkote 321 Liquid Epoxy Rust preventive coating has been specifically developed as an anti corrosive coating for steel structures that cannot be abrasive blast cleaned.

Product Features

•  Designed for room temperature drying as well as baking as per cure requirements.
•  Combines good application characteristics with excellent corrosion protection.
• Designed for application by brush, roller, dipping or spray.
•  Suitable for use on mechanically prepared steelwork or high pressure water cleaned steel, (abrasive blasting is not mandatory).
•  Can be applied over existing coatings.
•  Can be used as a two coat primer/finish system or overcoated with Rust preventive clear top coats

Product Details:

Scotchkote epoxy coating 152LV has been specifically developed as a surface tolerant anti corrosive coating for steel structures.

Features:

• Combines good applications characterstics with excellent corrosion protection and chemical resistance
•Is designed for application by brush as thicknesses of upto 1mm in a single application. Is suitable for use on grit blasted steel, machenically prepared steelwork or high pressure water cleaned steel
•Statisfies network rail line specification RT98, now NR/L3 /CIV/039

Additional Information:

• Item Code: 152LV

Product Details:

Epoxy sealer SP 810 has been specifically developed as a low viscosiy primer/sealer for concrete and cementitious surfaces prior to application of other scotchkote epoxy systems.

Features:

• Combines good application characterstics with excellent penetration and adhesion
• Designed for application by brush or roller
• Designed for use on concrete surfaces but can be used on other porous miniral substrates

Additional Information:

• Item Code: SP810